When a community pool loses more than an inch of water a day, the question for the board or property manager is simple. Where is that water going?
At a recent commercial pool assessment, John walked through a pool holding about 144,000 gallons, with nine skimmers and lane lines. Tennis courts and a clubhouse were nearby. This was a shared recreation facility with a much larger circulation system than a typical backyard pool.
The job offers a useful look at how The Leak Geeks approaches commercial pool leak detection for HOA boards, property managers and club operators in the Columbia area. The public service location is West Columbia, SC and nearby. We are not identifying the facility or claiming a final repair result.
What John found, and what still needed checking
The pool was losing over an inch of water per day. John reported a confirmed slow leak on the suction side. He was also checking the returns, so a return-side leak remained a possibility. The assessment was still underway.
John's on-camera update, paraphrased:
There is a slow leak on the suction side. We are checking the returns too and assessing the skimmers and returns across the pool.
That distinction matters. Evidence of a suction-side leak does not settle every question about the system. A separate return-side issue might also contribute to the loss. Finding one problem is a reason to keep the assessment organized, not a reason to assume every other part is sound.
For a board reviewing the work, separate the confirmed finding from the open questions. Here, the suction-side leak was confirmed. The precise leak location, any additional return leak and the eventual repair outcome were not established in the footage.
Why nine skimmers change the assessment
Skimmers draw surface water into the circulation system. Returns carry filtered water back into the pool. Both deserve attention when the goal is to understand unexplained water loss across a large facility.
With nine skimmers, checking one area and stopping would leave unanswered questions. John's stated scope was a full assessment of the skimmers and returns. That gives the operator a better basis for deciding what needs attention than a quick judgment based only on the water level.
A board does not need to become a pool-system expert. It does need a clear explanation of which areas were assessed, what the findings support and what remains uncertain. Those are useful questions to ask before approving the next step.
Why listening alone can point to the wrong place
John had already listened into the pool. Sound is useful evidence, but it needs context, especially around a gunite shell.
John's explanation, paraphrased:
Gunite can give false signals. Sound can travel from the pipes into the pool shell, so a sound in the shell does not automatically mean the shell is leaking.
For an operator, this is an important distinction. A noticeable sound at one spot may originate somewhere else. Treating the loudest spot as proof of a shell defect can send the investigation in the wrong direction.
A careful assessment compares what is heard with what is known about the circulation system. In this job, that meant continuing the skimmer and return assessment rather than presenting a sound alone as a final diagnosis. The footage supports an investigation in progress, not a claim that the shell needs work.
The equipment yard tells part of the story
The equipment area had a large commercial pump, three tan sand filters and a complex PVC manifold with motorized valve actuators. Chemical containers were also visible.
That arrangement helps explain why commercial assessment takes a system-wide view. The pool, its collection points, the return paths and the equipment area all belong to the same circulation system. A conclusion about one part needs to make sense alongside the rest.
Equipment footage is useful for showing managers the scale of the job. It is not proof that a filter, valve or pump caused the loss. Nothing in this assessment establishes those components as the leak source, and the presence of chemical containers does not establish a chemical-feed problem.
What property managers can prepare
Before an assessment, gather the water-level observations you already have. Note when staff noticed the drop, how often they add water and whether the operating schedule changed. Keep records of recent pool work available if there are any.
Ask the assessment team what access it needs to the pool and equipment area. Coordinate that access with whoever runs the facility. Do not change valve positions or operating routines just to test a theory without guidance from the people responsible for the system.
After the assessment, ask for a plain-language explanation of the confirmed findings and any remaining checks. If the investigation is incomplete, the board should know that before treating an early finding as a complete repair plan.
A practical next step for a commercial pool losing water
A daily drop of more than an inch deserves attention. Pool capacity alone cannot tell you how many gallons that inch represents; the water-surface area is needed for that calculation. We are not assigning a daily gallon-loss figure to this job.
For this community pool, the useful story is the assessment itself. John identified a suction-side leak, kept checking the returns and explained why sound in a gunite shell can be misleading. That is the level of clarity a property manager should expect when decisions affect a shared facility.
The Leak Geeks is Leaktronics Certified. For a commercial or community pool leak assessment in West Columbia, SC and nearby, call 803-570-5283 or visit theleakgeeks.net. Tell us what your team has observed so we can discuss the next step.
Short FAQ for HOAs and property managers
Does losing an inch a day prove the pool shell is leaking?
No. A water-level drop does not identify the source. In this job, John confirmed a suction-side leak and continued checking the returns. Sound transmitted into a gunite shell can also mislead an assessment.
Can a commercial pool have more than one leak?
Yes. Finding a suction-side leak does not rule out a separate return-side problem. A return leak remained a possibility in this assessment, not a confirmed second finding.
What should our team have ready before the visit?
Have water-level notes, refill observations and any recent pool-work records available. Ask what pool and equipment-area access is needed, then coordinate with your facility operator.
Who should we contact about a community pool assessment?
Call The Leak Geeks at 803-570-5283 or visit theleakgeeks.net. The team is Leaktronics Certified and serves West Columbia, SC and nearby, including the Columbia area.
