Open 24/7 · Based in West Columbia, SC · 803-570-5283 · Visit The Leak Geeks Utility Group
Water Main and Sewer Line Leak Detection for Contractors
When a newly installed water main fails its pressure test, digging from fitting to fitting can use up labor, machinery and project time before anyone knows where to look. The Leak Geeks Utility Group helps your crew narrow down suspected underground leaks first.
The Leak Geeks Utility Group is our sister company for water main leak detection in South Carolina and sewer line investigations. They work with utility contractors, water systems and municipal project teams statewide. They locate suspected leaks only. Your crew excavates and repairs. Findings are suspected locations, not guaranteed exact points.
Failed Pressure-Test Investigations
The Utility Group starts with the test record, how the section was isolated, and the conditions on site. Trapped air, temperature changes and other test conditions can affect a pressure-test result. After that review, they select diagnostic methods that fit the main and the access points you have.
They focus initially on 6-inch, 8-inch and 16-inch ductile-iron water mains, including black-coated pipe, and test sections of about 500 feet with accessible hydrants or valves. Other diameters and lengths can be reviewed by project.
Acoustic Leak Correlation
Two-sensor acoustic correlation may help estimate a leak location between accessible fittings when an adequate leak-noise signal exists. Other investigations can be assessed without operating pressure. Acoustic correlation requires a detectable leak signal, so they review the test setup and site conditions before choosing a method. Pipe material, diameter, branches, background noise and weak signals can reduce confidence. Contact listening or a ground microphone may help check the area where conditions allow.
Sewer Pipeline Investigations
The Utility Group also reviews failed gravity-sewer tests and suspected leakage. Groundwater entering through defects is infiltration. Wastewater leaving the pipe is exfiltration. CCTV can document visible defects, though flow, debris and submerged surfaces can limit what a camera sees. Project-approved testing can assess an isolated section, but a failed section test alone does not locate the defect. CCTV and approved testing methods depend on the project, available equipment and qualified partners.
Contractor and Municipal Support Across South Carolina
One utility leak detection partner, statewide. The Utility Group supports projects across the Midlands, Upstate, Pee Dee, Lowcountry and Grand Strand, including Columbia, Lexington, Chapin, Blythewood, Greenville, Spartanburg, Florence, Sumter, Charleston, Summerville, Myrtle Beach, Conway, Beaufort and Hilton Head. Mobilization and availability are confirmed for each project. No dispatch or appointment is confirmed until they accept the work. The company is based in West Columbia, SC.
How a Project Is Scoped
Share pipe material, diameter, section length, test readings, access points, project location and target date. They agree on scope, site responsibilities, deliverables and mobilization before scheduling, then discuss observations, suspected areas, limitations and follow-up options with the project team.
They report the suspected leak area. Your crew handles all excavation and pipe repairs. The utility or project owner determines acceptance and retest requirements. Leak location and avoided excavation costs cannot be guaranteed. A single excavation, shorter schedule or lower cost is not promised. Actual outcomes depend on site and leak conditions.
How This Fits With The Leak Geeks
The Leak Geeks is a Leaktronics Certified pool, pipe and slab leak detection and repair company serving about 50 miles around West Columbia, SC. Pipepoxy, a division of The Leak Geeks, lines leaking pool pipes from the inside with no digging. For water mains and sewer lines on utility projects, the right call is The Leak Geeks Utility Group.
Frequently Asked Questions
Do you excavate and repair the water main or sewer line?
No. The Leak Geeks Utility Group locates suspected leaks only. The contractor's crew handles excavation and pipe repairs.
Will you pinpoint the exact leak location?
Findings identify suspected leak locations, not guaranteed exact points. Two-sensor acoustic correlation may help estimate a location between accessible fittings when an adequate leak-noise signal exists. Outcomes depend on site and leak conditions.
What size water mains do you investigate?
The Utility Group focuses initially on 6-inch, 8-inch and 16-inch ductile-iron water mains, including black-coated pipe, and test sections of about 500 feet with accessible hydrants or valves. Other work is reviewed by project.
Where in South Carolina do you work?
Across all of South Carolina, including the Midlands, Upstate, Pee Dee, Lowcountry and Grand Strand. Mobilization and availability are confirmed for each project. The company is based in West Columbia, SC.
Visit The Leak Geeks Utility Group for water main leak detection in South Carolina · Call 803-570-5283
